BCA1550-32

41A, 32V Out, 110/220VAC In, AC/DC Battery Charger, 2 Bank

Brands
- Analytic Systems
Series
- BCA Analog Series
Industry
- Industrial
Volts
- 32 VDC
Amps
- 36 A

This combination does not exist.

Please Log in to see buy options.

The BCA1550 battery charger provides up to 1550 watts to charge a one or two bank battery system at 12, 24, 32, 48 or 72(rail) volts from a 110 or 220 VAC source. The batteries must share a common ground. Features include user selectable 2-stage or 3-stage charging profiles, temperature compensation and user initiated equalization for optimum charging and maximum battery life. Protection include output overvoltage, battery or charger over temperature, low input voltage, overload and short circuit.

Features

150 watts of charging power
Two or three bank charging
Temperature compensation
Manual equalization mode
Two or three stage charging profiles
Low EMI
Adjustable float voltage
Three year parts and labour warranty
Typical Service Life : > 10 years (87,600 hrs)

Volts	32 VDC
Amps	36 A
Power-Max	1.5 kW
Efficiency	> 90 % at Full Load
Power Factor	> 0.98 at Full Load
Frequency-Switching	50 ± 5% kHz
Voltage-In	85 - 265 VAC
Frequency-In	45 - 65 Hz
Current-In	3 A with Inrush Protection
Phase	Single Phase
Banks	2
Stages	2 or 3 stage user selectable

Temp-Operating	-25°C to +40°C @ maximum output. Derate Linearly 2.5% per °C from 40°C
Humidity	0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Isolation In-Out	> 1500 VDC
Isolation In-Case	> 1500 VDC
Isolation Out-Case	> 1500 VDC
Fuse-Out	2x ATM20
Length	42.7 cm
Width	20.8 cm
Height	9.7 cm

Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
Wall Mount (With Drip Shield)
Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)