BCA150-24

6A, 24V Out, 85-265VAC PFC In, AC/DC Battery Charger, 2 Bank

Brands
- Analytic Systems
Series
- BCA Analog Series
Industry
- Industrial
Volts
- 24 VDC
Amps
- 6 A

This combination does not exist.

Please Log in to see buy options.

The BCA150 provides up to 150 watts of precision charging power to up to two battery banks at 12 or 24 volts DC. This unit features universal input voltage, accepting any conventional source of AC power from 85 to 265 volts AC at 50 or 60Hz. Power factor correction technology ensures the most efficient use of this power. The unit can be easily configured for charging standard or deep cycle lead-acid, VRLA, or Gel cell type batteries through use of the output voltage adjust (Over a range of the standard output voltage ±1.0V). User-selectable two-stage or three-stage charging profiles and temperature compensation allow optimum charging of all battery types. Additionally, user-initiated cell equalization and low ripple charging profiles protect and maintain expensive battery systems greatly increase their lifetime usage. Extra input and output filtering reduce EMI to extremely low levels to prevent interference with sensitive communications equipment. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection, and output short circuit shutdown with automatic recovery.

Features

150 watts of charging power
Two or three bank charging
Temperature compensation
Manual equalization mode
Two or three stage charging profiles
Low EMI
Adjustable float voltage
Three year parts and labour warranty
Typical Service Life : > 10 years (87,600 hrs)

Volts	24 VDC
Amps	6 A
Power-Max	150W
Efficiency	> 90 % at Full Load
Power Factor	> 0.98 at Full Load
Frequency-Switching	50 ± 5% kHz
Voltage-In	85 - 265 VAC
Frequency-In	45 - 65 Hz
Current-In	3 A with Inrush Protection
Phase	Single Phase
Banks	2
Stages	2 or 3 stage user selectable

Temp-Operating	-25°C to +40°C @ maximum output. Derate Linearly 2.5% per °C from 40°C
Humidity	0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Isolation In-Out	> 1500 VDC
Isolation In-Case	> 1500 VDC
Isolation Out-Case	> 1500 VDC
Fuse-Out	ATL-15
Length	20.3 cm
Width	22.4 cm
Height	5.6 cm

Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
Wall Mount (With Drip Shield)
Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)