BCA1000-110-12

60A, 12V Out, 110VAC In, AC/DC Battery Charger, 2 Bank, CSA/UL

Brands
- Analytic Systems
Series
- BCA Analog Series
Industry
- Industrial
Volts
- 12 VDC
Amps
- 60 A

This combination does not exist.

Please Log in to see buy options.

The BCA1000 provides up to 1000 watts of precision charging power to up to two banks of batteries at 12, 24, 32, 36, 48 or 72(rail) volts DC from a 110 or 220 volts AC power source. The output voltage is easily adjusted 1.0 volts above or below the standard output voltage for standard or deep cycle lead-acid, VRLA or Gel cell type battery. All models feature user selectable 2-stage or 3-stage charging profiles and temperature compensation for optimum charging. Additionally, user-initiated equalization and voltage temperature compensation greatly increases the lifetime of expensive battery systems. Extra input and output filtering reduce EMI to extremely low levels and operation is monitored by a bright status indicator LED panel. Reliability features include an input fuse, thermal shutdown, current limiting, reverse battery hookup protection and output short circuit shutdown with automatic recovery.

Features

150 watts of charging power
Two or three bank charging
Temperature compensation
Manual equalization mode
Two or three stage charging profiles
Low EMI
Adjustable float voltage
Three year parts and labour warranty
Typical Service Life : > 10 years (87,600 hrs)

Volts	12 VDC
Amps	60 A
Power-Max	1 kW
Efficiency	> 90 % at Full Load
Power Factor	> 0.98 at Full Load
Frequency-Switching	45-65 ± 5% kHz
Voltage-In	90 - 130 VAC
Frequency-In	45 - 65 Hz
Current-In	3 A with Inrush Protection
Phase	Single Phase
Banks	2
Stages	2 or 3 stage user selectable

Temp-Operating	-25°C to +40°C @ maximum output. Derate Linearly 2.5% per °C from 40°C
Humidity	0 - 95% Relative Humidity (non-condensing) with standard conformal coating
Isolation In-Out	> 1500 VDC
Isolation In-Case	> 1500 VDC
Isolation Out-Case	> 1500 VDC
Fuse-In	MDA-20
Fuse-Out	ATC-40 x2
Length	36.8 cm
Width	25.1 cm
Height	12.7 cm

Material and Finish : Marine Grade Black Anodized Aluminum with 18-8 Stainless Fasteners
Wall Mount (With Drip Shield)
Connections : AC Input - IEC Inlet 26.4mm Tab Flange Mount, DC Output - Phoenix VDFK 4 Connector (Black and Red)